SuperTimer - One Stop Shopping for: Pinewood Derby Tracks, Timers and Race Management Software. Free Book - How to Run the Pinewood Derby Free Shipping And even more savings. Free Digital Scale Accurate to 0.01 ounces. Typical One Week Delivery to your door. Click above for special offer details .

SuperTrack Pinewood Track SuperTimer II Pinewood Timer Committee Discussion Summary Pricing Total System Order Now Track Only Timer Only Parts Pinewood Derby FAQ's Pinewood Derby Tech Support Pinewood Derby Links Contact Us Home

After reading these instructions, download the RaceManager Version 2.05 Patch installation software by clicking below. This patch is only guaranteed to work when updating Version 2.xx installations. For Version 1.xx installations, please contact us. Before running the download, the USB CONNECTOR MUST BE UNPLUGGED! The new USB driver requires that the old driver be removed. AS A RESULT YOU WILL HAVE TO RUN THIS INSTALLATION TWICE! The included Adapter driver works with Windows operating systems from 98 to 7. And, you MUST have a USB/Serial adapter from us. Other adapters may work but many, depending on who manufactured the chip inside, do not. The first time when the USB installation asks to UN-install, Click YES. This removes an older, potentially faulty version of the USB adapter driver. Then Re-Run Install RaceManager. This will install the newer multi operating system capable version and install RaceManager a second time as well. Sorry, the driver program doesn't allow us to be smarter. If you already have a working USB/Serial Adapter, when asked to uninstall it you may select NO. After the USB driver and RaceManager installation, plug the USB adapter into the computer and check the messages near the time in the lower right corner of the screen. Note that the provided software driver will only work with Adapters that self-identify as Prolific. Other Adapters require their own separate driver installation for your operating system. If any USB error occurs, shut down and restart your computer. Then try a different USB port until the USB adapter is found and installed. Finally power SuperTimer II and start RaceManager. This sequence is only required during installation. At other times, SuperTimer II, RaceManager and the USB adapter may be connected/powered in any order. Click to download RaceManager Installation software.